Via Giphy – Via Cats On Web
New Giphy photo tagged: cat, toy
↧
↧
A tutorial on how to replace doll eyelashes by Laurie Lenz
Lashing Out! Eyelash tutorial.
What you need:*Eyelashes...preferably a strip without glue on it. (Dollmore, or Volks sell them.)
*Aleene's Quik Dry Tacky Glue (I recommend the Quik Dry, or you'll be waiting for FOREVER.)(Never EVER EVER use Crazy Glue! It's from the devil.)
*Angled tweezers
*Angled scissors (that little piece of yarn is there to warn my family--"touch & die.")
*Toothpicks
*Damp Cotton Swab (not pictured.)
![]()
Hold your eyelash strip up to the doll's eye to get a rough estimate of how much you'll need.
![]()
Cut the section off the strip and gently roll your lash around a pencil to give it some curl.
![]()
Take the Quik Dry Tacky Glue and apply it to a toothpick.(This is a water based glue. If you ever want to remove the lashes, just wet a Qtip and dab on the lashes and they will come off. Never use any glue but a water based glue. )Dot dot dot the glue from her tear duct to the center of her eye. (Do not go past the center.)
![]()
Apply tacky glue to half of the eyelash.See that Q-tip? I always have a damp one there just in case I get some glue on my dollso I can quickly wipe it off.
![]()
Allow to sit for a few seconds and then with your angled tweezers, place the lash against the eyelid -glue to glue.
![]()
With a clean toothpick, gently press the lash into place.Go make a sandwich, waste time on Facebook, place a bid on a doll, or move your wash to the dryer, and allow the glue to dry.
![]()
Once the glue has set, press the eyelash down, so you can judge where it needs to end.
![]()
Pull the lash up gently, and cut to fit.
![]()
![]()
Pull the lash back and run a bead of glue on her upper lid, and run a bead of glue on the back of her eyelash.With the clean toothpick, press down and position.
![]()
Allow the spider lady's eyes to dry.
![]()
Once they are dry, take your angled scissors and trim the lashes.
![]()
From ordinary to extraordinary. Love those lashes, Daphne!
![]()
What you need:
*Eyelashes...preferably a strip without glue on it. (Dollmore, or Volks sell them.)
*Aleene's Quik Dry Tacky Glue
(I recommend the Quik Dry, or you'll be waiting for FOREVER.)
(Never EVER EVER use Crazy Glue! It's from the devil.)
*Angled tweezers
*Angled scissors (that little piece of yarn is there to warn my family--"touch & die.")
*Toothpicks
*Damp Cotton Swab (not pictured.)
Hold your eyelash strip up to the doll's eye to get a rough estimate of how much you'll need.
Cut the section off the strip and gently roll your lash around a pencil to give it some curl.
Take the Quik Dry Tacky Glue and apply it to a toothpick.
(This is a water based glue. If you ever want to remove the lashes, just wet a Qtip and dab on the lashes and they will come off. Never use any glue but a water based glue. )
Dot dot dot the glue from her tear duct to the center of her eye. (Do not go past the center.)
Apply tacky glue to half of the eyelash.
See that Q-tip? I always have a damp one there just in case I get some glue on my doll
so I can quickly wipe it off.
Allow to sit for a few seconds and then with your angled tweezers, place the lash against the eyelid -glue to glue.
With a clean toothpick, gently press the lash into place.
Go make a sandwich, waste time on Facebook, place a bid on a doll, or move your wash to the dryer, and allow the glue to dry.
Once the glue has set, press the eyelash down, so you can judge where it needs to end.
Pull the lash up gently, and cut to fit.
Pull the lash back and run a bead of glue on her upper lid,
and run a bead of glue on the back of her eyelash.
With the clean toothpick, press down and position.
Allow the spider lady's eyes to dry.
Once they are dry, take your angled scissors and trim the lashes.
From ordinary to extraordinary. Love those lashes, Daphne!
___
All text and photos in this post are by Laurie Lenz
Laurie's website is called "Laurie Lenz Angels Doll Studio" and you can see her fabulous work at this link:
↧
TAG x James Groman In the Flesh B.C. Blasters (5.13)
Following the previous sold-out purple release, Toy Art Gallery will release their In the Flesh B.C. Blasters from James Groman on Friday (5.13) @ Noon pdt from the TAG web store for $35 each or the set of 5 for $140.
![]()
![]()
↧
TK HUNTER DEATH MASK HACK Pre-Order
3A Toys has announced the pre-order info for their TK HUNTER DEATH MASK HACK. Going on sale Monday May 30th 2016 (likely the 29th if you're in the US) only at BAMBALAND, the 24-inch tall figure includes a 6-inch tall Action Portable TK. The set will run you $588.00, which includes free worldwide shipping.
↧
Dante's Last day of school!
So Dante went to school Wednesday. His last day of his first semester! Also made him removable glass
↧
↧
HASBROCON- Hasbro Registers Possible New Convention and Domain Names
Following the news in April about the registration of "Hascon" by Hasbro, for what most are assuming their plans for a new officially run fan focused convention for Transformers, and other properties. We learn today from the gents at TF@Moon that the company registered the name "Hasbro-con" on May 12th along with the domain name "www.hasbro-con.com" to go with it. This all we know about Hasbro's plans following the last Transformers BotCon and GI Joe conventions this year.
↧
Jakks Pacific Rolls Out World of Nintendo Items
Jakks Pacific Inc. has expanded its licensed World of Nintendo product line with new figures and plush items available this spring. New items include 2.5-inch figures and plush toys with sound effects from the game, and are available now at mass retailers online and in-store. The World of Nintendo Plush are 7.5 inches and feature characters [...]
↧
Not a Wind-up Toy but a Sailboat: How to Let Go and Let God
Are You Tired of Empty Cliches? What do we really mean when we spout off things like, “God is in con
↧
Zuru Launches Robo Fish Collection Inspired by Disney•Pixar’s Finding Dory
Zuru Toys has launched their Robo Fish collection, featuring characters from the June 17 release of Disney•Pixar’s Finding Dory. Kids will be able to recreate scenes from the movie with Dory, Nemo, Marlin, and Bailey. When placed under water, the Robo Fish begin to move just like a real fish would, and the characters feature a [...]
↧
↧
Kidrobot x Sekure D Codename Unknown 5″ Dunny
Kidrobot has announced the release of the Codename Unknown 5-inch Dunny by Secure D. Mathew Fabris, also known as Sekure D, lives and works in Melbourne, Australia. His Codename Unknown 5-inch tall Dunny is now available in stores and on Kidrobot.com. An exclusive pink colorway (shown below) is available only on Kidrobot.com. Codename Unknown retails for $29.99.
↧
WowWee’s Robotic Dog CHiP to Include Voice Recognition Feature
WowWee’s robotic dog, CHiP, will include a new voice recognition feature that will enhance the interacting and play experience. CHiP owners can now program their own name for their dog, and CHiP will learn its new name and respond to it. It will follow commands such as “come,” “sit,” “stay,” “lay down,” and “yoga,” for [...]
↧
TheToySource News! Final Form Frieza and Goki, Mega Man X, Gundam, Forager, MP-27 & More
↧
Mesh Realization – Samurai Spider-Man
Bluefin has announced the newest addition to the Meisho Realization figure series from Tamashii Nations. As the company reimagines famous superheroes, collectors will be able to get their hands on the Samurai Spider-Man, which is scheduled to debut at retailers in late-Summer/Fall of 2016. The 7-inch figure pays homage to the Samurai aesthetic and takes Spidey back to […] Read more
↧
↧
Kotobukiya Releasing a New Batman: Animated Series Statue
The Batman: Animated Series Statue From Kotobukiya Will Be Part of the ArtFX Line DC Comics and Kotobukiya have partnered up in creating a new ARTFX+ tenth scale statue. This time, they’ve chosen to...
[[ This is a content summary only. Visit my website for full links, other content, and more! ]]![]()
[[ This is a content summary only. Visit my website for full links, other content, and more! ]]
↧
Kotobukiya Releasing a New Batman: Animated Series Statue
The Batman: Animated Series Statue From Kotobukiya Will Be Part of the ArtFX Line DC Comics and Kotobukiya have partnered up in creating a new ARTFX+ tenth scale statue. This time, they’ve chosen to create a Batman: Animated series statue, based on his look in the series as envisioned by Bruce Timm. Following numerous New […]
↧
Ghostbusters Walmart Exclusive 6" Peter Venkman Figure Video Review & Images
↧
Grid Iron
Learn Paul Kerbel’s yoyo trick, the Grid Iron.
The post Grid Iron appeared first on YoYoTricks.com.
↧
↧
Brent Nolasco First Look at Ziggy
Seemingly sculpting and creating nonstop, Brent Nolasco is pushing the evolution of his recent creature line—Bun Bun, Barse, Felix, Sonny, Mousie, Sitting in a Pretty Daze—with his brand-new creation, Ziggy. Perhaps the most wicked so far, Ziggy is a devilish one with large pincer claws and little spider minions crawling...
![]()
![]()
↧
DC Comic Multiverse 6" Non-Movie Series 3 Figures With Dark Knight Returns Robin
↧
Batman v Superman: Dawn Of Justice Batman & Superman ArtFX+ statues Video Review & Images
↧
More Pages to Explore .....
